LORD- Thermoset MD-140SP Adhesive

ID AVLRD140
0 reviews Write a review
LORD Thermoset MD-140SP silver-filled conductive adhesive offers excellent thermal conductivity. It is designed for use in thermally demanding die attach applications such as microprocessor, power semiconductor and VLSI assembly. Thermoset MD-140SP adhesive is low stress, making it suitable for use
Price
$0.00
price per Each
excl. tax
Image title
Image title   Limited Stock Image title   In Stock
Each
This product cannot be ordered at the moment.
Description

LORD Thermoset MD-140SP silver-filled conductive adhesive offers excellent thermal conductivity. It is designed for use in thermally demanding die attach applications such as microprocessor, power semiconductor and VLSI assembly. Thermoset MD-140SP adhesive is low stress, making it suitable for use with large die.

Thermoset MD-140SP adhesive provides excellent adhesion to a wide variety of surfaces including silicon, silver, gold and copper. Low ionic levels make it ideally suited for demanding semiconductor and hybrid assembly applications.

Shelf life is twelve months from date of manufacture when stored at -40°C in original, unopened container. Syringe must be maintained at -40°C in a vertical (upright) position with the dispense tip facing down. Do not store syringe on its side (horizontally).

  • Convenient – provides a working life of up to 72 hours after loading a syringe into the dispensing equipment at room temperature.
  • Excellent Dispensability – allows high-speed, accurate syringe dispensing of fine dots or lines; can be used with time/pressure, positive displacement or linear dispense heads.
  • Fast Cure – rapidly cures at 150°C and 180°C.
Uncured Typical Properties**

Appearance: Silver Paste
Viscosity, cps @ 25°C: 30,000
Specific Gravity: 3.7

Cured Typical Properties**

Volume Resistivity, ohm-cm @ 25°C: 1.0 x 10-4
Thermal Conductivity***, W/mK: 12
Coefficient of Linear Thermal Expansion, ppm/°C:     alpha 1 = 60     alpha 2 = 190
Glass Transition Temperature (Tg), °C: 82
Die Shear Strength, kgf/cm2 @ 25°C: 575
Storage Modulus, MPa @ 25°C: 3300


Material Safety Data Sheet (MSDS): Click Here
Technical Data Sheet: Click Here

*Actual product colours may vary from on-screen and printed representations.
**Data is typical and not to be used for specification purposes.
*** Cure for analysis 2 hours at 150°C. Measured by Laser Flash method.
Reviews (0)
There are no reviews yet.
    Loading
    Loading