HumiSeal™ Stripper 1063 is a non-acidic, non-destructive stripper that dissolves cured HumiSeal™ polyurethane coatings without negatively affecting printed wiring board substrates or components. HumiSeal™ Stripper 1063 is in full compliance with the RoHS Directive 2002/95/EC.
HumiSeal™ Stripper 1063 is safe for use on copper, gold, silver or nickel plating, amine cured epoxies, diallyl phthalate, neoprene, phenolic resins, polyethylene, Teflon, Kynar and most vinyl coated wires. It will attack anhydride-cured epoxies and some magnetic wire coatings.
Material Safety Data Sheet (MSDS): Liquid
|Compatible HumiSeal™ Coatings||1A27 & 1A33 Families|
|Average Wt.(lbs) /Gal @ 20°C
||0.84 ± .01
|Relative Evaporating Rate (BuAc =1)
|Shelf Life, DOM
Technical Data Sheet (TDS): Liquid
*Actual product colours may vary from on-screen and printed representations.