Each kit makes three splices. Lugs not included in kits. Feeder of 1/0 AWG-250 kcmil (60-120 sq mm), motor lead 2 AWG-250 kcmil (35-120 sq mm).
3M™ Motor Lead Splicing Kits 5300 Series are a series of kits designed for splicing motor lead cables to incoming feeder cables, including the accommodation of pigtails (stub) connections at 1000 Volts and less. The splice’s main component, the lug cover, is made from EPDM rubber as a slip-on. A mastic is used for the moisture seal. These kits are designed to be used with copper compression, one-hole lugs. After being crimped onto the cables, the lugs are bolted together in a pigtail configuration, the insulated and sealed with the 3M Motor Lead Splicing Kit. Each kit makes three splices and contain all the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. Scotchlok™ 30,000 Series copper compression lugs, or other UL listed copper lugs, can be used.
Material Safety Data Sheet (MSDS):
Technical Data Sheet (TDS):
|China RoHS - Below MCV
||Pigtail (1 hole lugs)
|EU RoHS Compliant
|Range Feeder Cable (AWG & kcmil)
|Range Motor Lead (AWG & kcmil)
||0 - 1000 V
*Actual product colours may vary from on-screen and printed representations.