Edge sealing minimizes the adverse effects of rigorous use or prolonged or severe exposure conditions by providing water and contaminant-tight seal between a graphic film and substrate. It is required for some 3M warranted graphics (refer to the base film's Product Bulletin for details). These products also may be applied even after the applied film shows signs of wear, such as edge lifting, to significantly reduce further wear; however, such application does not meet the requirements for warranted graphics. Edge sealers 3950 and 4150S are single component colorless liquids.
- Resists mild acids, mild alkalis, and salts.
- Excellent water resistance.
- Hydraulic fluid, LD-4, will dissolve 3950 within one hour of exposure
Color: Clear liquid
Material Safety Datasheet (MSDS): Click Here
Technical Data Sheet: Click Here
Material: Acrylic/vinyl solution in xylene
Minimum viscosity: 300 Centipoise
Percent solids: 46 +/- 2.5 %
Application temperature: 50°to 100°F (10°to 38°C)
Service temperature range of product in use: -60°to +150°F (-51°to + 65°C)
Dimension: 8 oz can
*Actual product colours may vary from on-screen and printed representations.