HumiSeal - 1063 Stripper
ID
PCHM1063
HumiSeal™ Stripper 1063 is a non-acidic, non-destructive stripper that dissolves cured HumiSeal™ polyurethane coatings without negatively affecting printed wiring board substrates or components. HumiSeal™ Stripper 1063 is in full compliance with the RoHS Directive 2002/95/EC. HumiSeal™ Stripper
Description
HumiSeal™ Stripper 1063 is a non-acidic, non-destructive stripper that dissolves cured HumiSeal™ polyurethane coatings without negatively affecting printed wiring board substrates or components. HumiSeal™ Stripper 1063 is in full compliance with the RoHS Directive 2002/95/EC.
HumiSeal™ Stripper 1063 is safe for use on copper, gold, silver or nickel plating, amine cured epoxies, diallyl phthalate, neoprene, phenolic resins, polyethylene, Teflon, Kynar and most vinyl coated wires. It will attack anhydride-cured epoxies and some magnetic wire coatings.
Compatible HumiSeal™ Coatings | 1A27 & 1A33 Families |
Average Wt.(lbs) /Gal @ 20°C | 2.10 |
Specific Gravity | 0.84 ± .01 |
Relative Evaporating Rate (BuAc =1) | 11.1 |
Shelf Life, DOM | 12 months |
Colour | Clear |
Material Safety Data Sheet (MSDS): Liquid || Gel
Technical Data Sheet (TDS): Liquid || Gel
*Actual product colours may vary from on-screen and printed representations.
Reviews (0)
There are no reviews yet.
3M- 208 Electrical Resin
ID
AV3MZ0000352
$0.00
EPO-TEK- 730-110 General Epoxy
ID
AVET0110
$0.00
Item Details
Emerson & Cuming- 15 Catalyst
ID
AVEM0015
$0.00
Item Details
#4358
ID
ETGT4358
$0.00
Item Details