Dow Corning- 184 Silicone Encapsulant

Dow Corning Sylgard 184 Silicone Elastomer: Transparent encapsulant with good flame resistance. Sylgard™ 184 Silicone Elastomer is suitable for: LED Lighting encapsulation, Power supplies, Connectors, Sensors, Industrial controls, Transformers, Amplifiers, High voltage resistor packs, Relays, Adhesive/encapsulant for solar cells, Adhesive handling beam lead integrated circuits during processing.

• Flowable
• Room temperature and heat cure
• Good dielectric properties
• Rapid, versatile cure processing controlled by temperature
• High transparency allows easy inspection of components

Color: Clear
Dielectric Constant at 100 Hz: 2.72
Dielectric Constant at 100 kHz: 2.68
Dielectric Strength: 500 volts per mil v/mil
Dissipation Factor at 100 Hz: 0.00257
Dissipation Factor at 100 kHz: < 0.00133
Durometer - Shore A: 43 Shore A
Dynamic Viscosity: 3500 Centipoise
Heat Cure: 10 Minutes @ 150 Deg C
Heat Cure: 20 Minutes @ 125 Deg C
Heat Cure: 35 Minutes @ 100 Deg C
Mix Ratio: 10:1 Base to Catalyst 87-RC
Room Temperature Cure - Hours: 48 Hours
Shelf Life: 720 Days
Specific Gravity @ 25C: 1.03
Temperature Range: -45 Deg C to 200 Deg C
Thermal Conductivity: 0.27 Watts per meter K
UL 94 V-0 @ 8.4 mm thickness
UL 94 V-1 @ 6.0 mm thickness
Volume Resistivity: 2.9e+014 ohm-centimeters
Working Time: > 90 Minutes

*Actual product colours may vary from on-screen and printer representations.