Dow Corning- 1-2620 Dispersion

Dow Corning ™ 1 - 2620 Dispersion RTV Elastoplastic Conformal Coating. One-part, clear, moisture RTV cure with mild heat acceleration possible, low viscosity, hard, slick finish with abrasion resistance, solvent borne, UL and Mil Spec, contains UV indicator.

• Cures to tough, resilient, abrasion resistant surface
• Solvent-borne resin coating with lower odor
• Reduced VOC content as measured by certain U.S. state standards
• Room temperature cure
• UV indicator for inspection
• UL-94 V-0 flammability rating
• UL-746E Recognized
• IPC-CC-830 Qualified
• Mil-I-46058C Approved
• Low viscosity enhances flow and fill in narrow gaps and spaces
• No ovens required for cure
• Optional mild heat acceleration (after solvent flash-off) can speed in-line processing
• Good adhesion allows use with many low-solids (no clean) and no-lead solders
• May simplify VOC emissions recovery in some U.S. States
• UV indicator allows for automated inspection
• Can be good choice for applications requiring increased toughness and abrasion resistance after cure

Dielectric Constant at 100 Hz: 2.69
Dielectric Constant at 100 kHz: 2.68
Dielectric Strength: 550 volts per mil v/mil
Dissipation Factor at 100 Hz: 0.002
Dissipation Factor at 100 kHz: 0.0003
Dynamic Viscosity: 150 Centipoise
Flowable
Room Temperature Cure - Hours: > 1 Hours
Shelf Life: 1080 Days
Specific Gravity @ 25C: 1.11
Tack-Free Time-50% RH: 5 Minutes
Temperature Range: -45 Deg C to -200 Deg C
Volume Resistivity: 4.6e+013 ohm-centimeters

Material Safety Data Sheet (MSDS): Click Here
Technical Data Sheet: Click Here

*Actual product colours may vary from on-screen and printer representations.